Proxxon PD 230/E Lathe
Proxxon PD 230/E Lathe

FEATURES

1 - Gear casing with table showing the suitable cutting speed corresponding to material and diameter.
2 - Headstock spindle with 10.5 mm bore and MT 1 taper.
3 - Main switch with emergency stop function and restart protection.
4 - 3 jaw chuck, 2 - 68 mm capacity.
5 - The top slide, used for taper turning, and the tool holder are included as standard.
6 - MT 1 live centre included as standard.
7 - Handwheels with adjustable scales; 1 division = 0.025 mm, 1 revolution = 1 mm.
8 - The lathe bed is of cast iron with ground prism for tool rest and tailstock, ensuring minimal deflection even at high loads.
9 - The automatic feed may be set to either 0.05 or 0.1 mm/revolution.
10 - Combination of 3 speeds (attained by swapping drive belt position
and electronic speed control yield speeds of 100 to 3,000 rpm.

For spindle speeds from 100 to 3,000 rpm. Useable on materials such as plastic, steel, brass, aluminium. Complete with automatic feed, thread cutting facility, gear chuck, live centre and top slide for taper turning. Used to part, machine stock and cut tapers. The numerous optional accessories enable one to drill, mill and slot.

SPECIFICATION

Centre distance 230 mm, swing 56 mm
Height over cross slide 28 mm
Cross slide travel 60 mm and top slide 45 mm
Tool holder for cutters 8 x 8 mm
Spindle bore 10.5 (spindle run out 0.01 mm without chuck), with MT 1 (short)
Fitted with precision ball bearings
The thread cutting facility yields the most important pitches: 0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1.0 - 1.25 - 1.5 mm (metric)
Spindle speeds of 300, 900 and 3,000 rpm are provided
Automatic feed may be set either 0.05 or 0.1 mm/revolution
Tailstock barrel feed of 30 mm and MT 1 (short)
Capacitor motor operates at 220 - 240 Volt, 50 Hz mains with 140 W input / 60 W output as well as bi-directional operation
Workpieces are fitted to the 3 jaw chuck (2 - 35 mm) and with outside jaws (24 - 68 mm)
Feed knobs have a feed of 1 mm/revolution
Each revolution is calibrated in 40 divisions, with one division = 0.025 mm
Overall dimensions approx. 530 x 250 x 150 mm
Weight approx. 10kg

Accessory details to follow


Rejon Machine Tools Homepage | Return to top of page | Close and exit page